Hide wifi IO rates when disconnected

[khatus.git] / bin / khatus_show

#! /bin/bash

set -e

BIN=$HOME/bin
STATUS_DIR=$HOME/var/run/status
STATUS_FILE__WIFI=$STATUS_DIR/wifi
STATUS_FILE__ENERGY_NOTIFIED_BELLOW_HALF=$STATUS_DIR/notified_energy_bellow_half

load=$(awk '{printf("%4.2f", $1)}' /proc/loadavg)

fan=$(awk '/^speed:/ {printf "%4d", $2}' /proc/acpi/ibm/fan)

cpu=$($BIN/khatus_cpu_usage_from_proc_since_last_check)

memory=$(
    free \
    | awk '
        function round(n) {return int(n + 0.5)}

        $1 == "Mem:" {
            total=$2;
            used=$3;
            cache=$6;
            prev_file = "/home/siraaj/var/run/status/memory_used_percentage";
            curr = round(used / total * 100);
            getline prev < prev_file;
            print curr > prev_file;
            if (curr > prev) {
                direction = ">";
            } else if (curr < prev) {
                direction = "<";
            } else {
                direction = "=";
            }
            printf("%s%d%%", direction, curr);
        }')

temp=$(awk 'NR == 1 {print $1 / 1000}' /sys/class/thermal/thermal_zone0/temp)

disk_io=$(
    awk '
        {
            bytes_per_sector = 512
            bytes_per_unit   = 1024 * 1024

            curr_sectors_read  = $3
            curr_sectors_write = $7

            prev_file_prefix        = "/home/siraaj/var/run/status/disk_io"
            prev_sectors_read_file  = prev_file_prefix "_sectors_read"
            prev_sectors_write_file = prev_file_prefix "_sectors_write"

            getline prev_sectors_read  < prev_sectors_read_file
            getline prev_sectors_write < prev_sectors_write_file

            diff_read_sectors  = (curr_sectors_read  - prev_sectors_read)
            diff_write_sectors = (curr_sectors_write - prev_sectors_write)

            diff_read_bytes  = diff_read_sectors  * bytes_per_sector
            diff_write_bytes = diff_write_sectors * bytes_per_sector

            diff_read  = diff_read_bytes  / bytes_per_unit
            diff_write = diff_write_bytes / bytes_per_unit

            print curr_sectors_read  > prev_sectors_read_file
            print curr_sectors_write > prev_sectors_write_file

            printf("%0.3f▲ %0.3f▼\n", diff_write, diff_read);

        }
        ' /sys/block/dm-1/stat
)

disk=$(
    df \
    | awk -v disk_io="$disk_io" '
        function round(n) {return int(n + 0.5)}

        $1 == "/dev/mapper/kubuntu--vg-root" {
            curr_perc = $5; sub("%$", "", curr_perc);
            prev_perc_file = "/home/siraaj/var/run/status/disk_space_used";
            getline prev_perc   < prev_perc_file;
            print curr_perc > prev_perc_file;
            if (curr_perc > prev_perc) {
                direction = ">";
            } else if (curr_perc < prev_perc) {
                direction = "<";
            } else {
                direction = "=";
            }
            printf("%s[%d%% %s]", direction, curr_perc, disk_io);
        }')

network=$(
    awk -v wifi_conn=$(cat $STATUS_FILE__WIFI) '
        BEGIN {
            bytes_per_unit = 1024 * 1024
        }

        NR > 2 {
            device     = $1; sub(":$", "", device);
            curr_read  = $2;
            curr_write = $10;

            prev_file_prefix  = "/home/siraaj/var/run/status/io_net_" device;
            prev_read_file  = prev_file_prefix "_read";
            prev_write_file = prev_file_prefix "_write";

            getline prev_read < prev_read_file;
            getline prev_write < prev_write_file;

            diff_read  = (curr_read  - prev_read ) / bytes_per_unit;
            diff_write = (curr_write - prev_write) / bytes_per_unit;

            print curr_read  > prev_read_file;
            print curr_write > prev_write_file;

            devices[device] = sprintf("%0.3f▲ %0.3f▼", diff_write, diff_read);
        }

        END {
            lo      = devices["lo"]
            #eth    = devices["enp0s25"]
            wifi_io = devices["wlp3s0"]
            if (wifi_conn == "--") {
                wifi = wifi_conn
            } else {
                wifi = wifi_conn " " wifi_io
            }
            printf("[%s | %s]", lo, wifi)
        }
    ' /proc/net/dev
)

energy=$(
    upower -e \
    | grep battery \
    | xargs upower -i \
    | awk '
        /^ +percentage: +/ {percentage=$2}
        /^ +state: +/      {state=$2}
        END {
            if (state == "discharging") {
                direction_of_change = "<"
            } else if (state == "charging") {
                direction_of_change = ">"
            } else {
                direction_of_change = "="
            };
            printf("%s%s", direction_of_change, percentage)
        }')

datetime=$(date +'%a, %b %d, %H:%M:%S')

#volume_amixer=$(
#    amixer get Master \
#    | tail -1 \
#    | awk '
#        {
#            level = $4;
#            sub("^\\[", "", level);
#            sub("\\]$", "", level);
#            print level;
#        }' \
#    )

#volume_amixer=$(
#    amixer get Master \
#    | tail -n 1 \
#    | awk '{print $4}' \
#    | tr -d '[]'
#)

volume_pactl=$(
    pactl list sinks \
    | awk '
        /^\tMute:/ {
            printf("%s,", $0);
        }
        /^\tVolume:/ {
            for (i=2; i<=NF; i++) printf(" %s", $i);
        }' \
    | awk -v RS=',' '
        /^[ \t]*Mute:/        {mute  = $2}
        /^[ \t]*front-left:/  {left  = $4}
        /^[ \t]*front-right:/ {right = $4}
        END {
            if (mute == "yes") {
                printf("x")
            } else {
                printf("%s %s", left, right)
            }
        }
        '
)

volume="[$volume_pactl]"

screen_brightness=$(
    max=$(cat /sys/class/backlight/acpi_video0/max_brightness)
    cur=$(cat /sys/class/backlight/acpi_video0/brightness)
    awk -v max=$max -v cur=$cur 'BEGIN {printf("%d%%", cur/max*100)}'
)

#bluetooth_status=$(
#    grep '^status:' /proc/acpi/ibm/bluetooth \
#    | awk '
#        $2 == "disabled" {printf "off"}
#        $2 == "enabled"  {printf "on"}
#        '
#)

bluetooth_power=$(
    echo -e 'show \n quit' \
    | bluetoothctl \
    | awk '
        /^Controller / {
            controller = $2;
            controllers[++ctrl_count] = controller;
        }
        /^\t[A-Z][A-Za-z]+:/ {
            key = $1;
            sub(":$", "", key);
            val = $2;
            for (i=3; i<=NF; i++) {
                val = val " " $i};
                data[controller, key] = val;
        }
        END {
            # Using the 1st seen controller. Should we select specific instead?
            power_status = data[controllers[1], "Powered"];
            if (ctrl_count > 0) {
                if (power_status == "no") {
                    power_status = "off"
                } else if (power_status == "yes") {
                    power_status = "on"
                } else {
                    printf("Unexpected bluetooth power status: %s\n", power_status)\
                        > "/dev/stderr";
                    power_status = "ERROR"
                }
            } else {
                power_status = "off"  # TODO: Perhaps use differentiated marker?
            }
            printf("%s", power_status);
        }'
)

#touchpad_status=$(
#    xinput list-props 12 \
#    | awk '
#        /^\tDevice Enabled \([0-9]+\):/ {
#            status = $4;
#            printf("%s", status);
#        }'
#)

#color_off='\033[0m'
#color_on_bg_gray='\033[m\033[40m'

energy_direction=$(echo "$energy" | cut -b 1)
energy_percentage=$(echo "$energy" | tr -d '<>=%')
if [[ "$energy_direction" = '<' ]]
then
    if [[ $energy_percentage -le 5 ]]
    then
        DISPLAY=:0.0 notify-send \
            -u critical \
            "Energy CRITICALLY low: $energy" \
            'CHARGE NOW!!! GO GO GO!!!'
    elif [[ $energy_percentage -le 10 ]]
    then
        DISPLAY=:0.0 notify-send \
            -u critical \
            "Energy VERY low: $energy" \
            'Plug it in ASAP.'
    elif [[ $energy_percentage -le 15 ]]
    then
        DISPLAY=:0.0 notify-send \
            -u critical \
            "Energy low: $energy" \
            'Get the charger.'
    elif [[ $energy_percentage -le 50 ]]
    then
        if [[ ! -a "$STATUS_FILE__ENERGY_NOTIFIED_BELLOW_HALF" ]]
        then
            DISPLAY=:0.0 notify-send \
                -u normal \
                "Energy bellow half: $energy" \
                'Where is the charger?'
            touch "$STATUS_FILE__ENERGY_NOTIFIED_BELLOW_HALF"
        fi
    fi
else
    rm -f "$STATUS_FILE__ENERGY_NOTIFIED_BELLOW_HALF"
fi

weather=$(awk 'NR == 1 {printf("%d°F", $1)}' ~/var/run/metar-KJFK-decoded-temp-fahrenheit)

signal_last_msg_age=$(
    ls -lt --time-style=+%s $HOME/var/lib/signal/latest_message.json \
    | awk -v now_seconds=$(date +%s) \
    '{
        mtime_seconds = $6;
        seconds = now_seconds - mtime_seconds;
        minutes = seconds / 60;
        hours   = minutes / 60;
        days    = hours / 24;
        weeks   = days / 7;
        months  = days / 30;
        #fmt = "%.1f";
        fmt = "%d";
        #printf(fmt " s\n", seconds);
        printf(fmt " m\n", minutes);
        printf(fmt " h\n", hours);
        printf(fmt " d\n", days);
        printf(fmt " w\n", weeks);
        printf(fmt " mo\n", months);
    }' \
    | awk '$1 >= 1' \
    | sort -n -k 1 \
    | head -1 \
    | tr -d ' '
)

mpd_state=$(
    echo 'status' \
    | nc 127.0.0.1 6600 \
    | awk '
        {
            status[$1] = $2
        }

        END {
            state = status["state:"]
            symbol = "-"
            if (state == "play") {
                symbol = "▶"
            } else if (state == "pause") {
                symbol = "❚❚"
            } else if (state == "stop") {
                symbol = "⬛"
            }
            printf("%s", symbol)
        }
        '
)

mpd_current=$(
    echo 'currentsong' \
    | nc 127.0.0.1 6600 \
    | awk -v max_chars=10 '
        /^OK/ {
            next
        }

        {
            key = $1
            val = $2
            for (i=3; i<=NF; i++) {val = val " " $i}
            data[key] = val
        }

        END {
            if (data["Name:"]) {
                out = data["Name:"]
            } else {
                file = data["file:"]
                last = split(file, parts, "/")
                out = parts[last]
            }
            printf("%s", substr(out, 1, max_chars))
        }
        '
)

graphics_card=$(
    nvidia-smi \
        --format=csv,noheader,nounits \
        --query-gpu=memory.total,memory.used,temperature.gpu \
    | awk -F ',' '
        {
            mem_total = $1;
            mem_used  = $2;
            temp      = $3;
            mem_used_percent = (100 * mem_used) / mem_total;
            printf("[%d%% %dC]", mem_used_percent, temp);
        }
        '
)

echo \
"\
 E$energy\
 \
 \
 G=$graphics_card\
 \
 \
 M$memory\
 \
 \
 C=[$cpu  ${temp}°C ${fan}rpm]\
 \
 \
 L=$load\
 \
 \
 D$disk\
 \
 \
 N:$network\
 \
 \
 B:$bluetooth_power\
 \
 \
 S=$screen_brightness\
 \
 \
 V=$volume\
 \
 [$mpd_state $mpd_current]\
 \
 $signal_last_msg_age\
 \
 $weather\
 \
 $datetime \
"