#! /bin/bash
+set -e
+
+produce_fan() {
+ fan_path="$1"
+ cat "$fan_path"
+}
+
+produce_temperature() {
+ thermal_zone="$1"
+ cat "/sys/class/thermal/thermal_zone${thermal_zone}/temp"
+}
+
+produce_loadavg() {
+ cat /proc/loadavg
+}
+
+produce_disk_io() {
+ disk_io_device="$1"
+ awk '
+ {
+ r = $3
+ w = $7
+ print w, r
+ }
+ ' "/sys/block/$disk_io_device/stat"
+}
+
+produce_disk_space() {
+ disk_space_device="$1"
+ df --output=pcent "$disk_space_device" | awk 'NR == 2 {print $1}'
+}
+
+produce_net_addr_io() {
+ ip -s addr \
+ | awk '
+ BEGIN {
+ bytes_per_unit = 1024 * 1024
+ }
+
+ /^[0-9]+:/ {
+ sub(":$", "", $1)
+ sub(":$", "", $2)
+ sequence = $1
+ interface = $2
+ interfaces[sequence] = interface
+ }
+
+ /^ +inet [0-9]/ {
+ sub("/[0-9]+", "", $2)
+ addr = $2
+ addrs[interface] = addr
+ }
+
+ /^ +RX: / {transfer_direction = "r"}
+ /^ +TX: / {transfer_direction = "w"}
+
+ /^ +[0-9]+ +[0-9]+ +[0-9]+ +[0-9]+ +[0-9]+ +[0-9]+ *$/ {
+ io[interface, transfer_direction] = $1;
+ }
+
+ END {
+ for (seq=1; seq<=sequence; seq++) {
+ interface = interfaces[seq]
+ label = substr(interface, 1, 1)
+ if (addrs[interface]) {
+ curr_read = io[interface, "r"]
+ curr_write = io[interface, "w"]
+ print(interface, addrs[interface], curr_write, curr_read)
+ } else {
+ print(interface)
+ }
+ }
+ }'
+}
+
+produce_net_wifi_status() {
+ nmcli \
+ -f ACTIVE,SSID,SIGNAL \
+ -t \
+ d wifi \
+ | awk \
+ -F ':' \
+ '
+ BEGIN {wifi_status = "--"}
+ $1 == "yes" {wifi_status = $2 ":" $3 "%"}
+ END {print wifi_status}
+ '
+}
+
+produce_bluetooth_power() {
+ echo -e 'show \n quit' \
+ | bluetoothctl \
+ | awk '
+ /^Controller / {
+ controller = $2;
+ controllers[++ctrl_count] = controller;
+ }
+ /^\t[A-Z][A-Za-z]+:/ {
+ key = $1;
+ sub(":$", "", key);
+ val = $2;
+ for (i=3; i<=NF; i++) {
+ val = val " " $i};
+ data[controller, key] = val;
+ }
+ END {
+ # Using the 1st seen controller. Should we select specific instead?
+ power_status = data[controllers[1], "Powered"];
+ if (ctrl_count > 0) {
+ if (power_status == "no") {
+ power_status = "off"
+ } else if (power_status == "yes") {
+ power_status = "on"
+ } else {
+ printf("Unexpected bluetooth power status: %s\n", power_status)\
+ > "/dev/stderr";
+ power_status = "ERROR"
+ }
+ } else {
+ power_status = "off" # TODO: Perhaps use differentiated marker?
+ }
+ printf("%s\n", power_status);
+ }'
+}
+
+produce_screen_brightness() {
+ screen_brightness_device_path="$1"
+ echo "\
+ $(cat $screen_brightness_device_path/max_brightness) \
+ $(cat $screen_brightness_device_path/brightness)\
+ "
+}
+
+produce_volume() {
+ pactl list sinks \
+ | awk '
+ /^\tMute:/ {
+ printf("%s,", $0);
+ }
+ /^\tVolume:/ {
+ for (i=2; i<=NF; i++) printf(" %s", $i);
+ }' \
+ | awk -v RS=',' '
+ /^[ \t]*Mute:/ {mute = $2}
+ /^[ \t]*front-left:/ {left = $4}
+ /^[ \t]*front-right:/ {right = $4}
+ END {
+ if (mute == "yes") {
+ print("x")
+ } else {
+ print("%s %s\n", left, right)
+ }
+ }
+ '
+}
+
produce_mpd_state() {
echo 'status' \
| nc 127.0.0.1 6600 \
}
printf(\
- "%s %s %s",
+ "%s %s %s\n",
status["state:"], current_time, current_percentage\
)
}
}
produce_weather() {
- metar -d "$WEATHER_STATION_ID" 2>&1 \
+ weather_station_id="$1"
+ metar -d "$weather_station_id" 2>&1 \
| awk '
/METAR pattern not found in NOAA data/ {
failures++
consume() {
pipe="$1"
+ debug="$2"
+ prefixes_of_net_interfaces_to_show="$3"
tail -f "$pipe" \
| stdbuf -o L awk \
- -v opt_debug=0 \
+ -v opt_debug="$debug" \
-v opt_mpd_song_max_chars=10 \
+ -v opt_prefixes_of_net_interfaces_to_show="$prefixes_of_net_interfaces_to_show" \
'
+ /^in:FAN +status:/\
+ {
+ split_msg_parts()
+ db["fan_status"] = $2
+ }
+
+ /^in:FAN +speed:/\
+ {
+ split_msg_parts()
+ db["fan_speed"] = $2
+ }
+
+ /^in:FAN +level:/\
+ {
+ split_msg_parts()
+ db["fan_level"] = $2
+ }
+
+ /^in:TEMPERATURE/\
+ {
+ split_msg_parts()
+ db["temperature"] = $1
+ }
+
+ /^in:LOAD_AVG/\
+ {
+ split_msg_parts()
+ set_load_avg()
+ }
+
+ /^in:DISK_IO/\
+ {
+ split_msg_parts()
+ set_disk_io()
+ }
+
+ /^in:DISK_SPACE/\
+ {
+ split_msg_parts()
+ db["disk_space_used"] = msg_body
+ }
+
+ /^in:NET_ADDR_IO/\
+ {
+ split_msg_parts()
+ set_net_addr_io()
+ }
+
+ /^in:NET_WIFI_STATUS/\
+ {
+ split_msg_parts()
+ db["net_wifi_status"] = msg_body
+ }
+
+ /^in:BLUETOOTH_POWER/\
+ {
+ split_msg_parts()
+ db["bluetooth_power"] = msg_body
+ }
+
+ /^in:SCREEN_BRIGHTNESS/\
+ {
+ split_msg_parts()
+ set_screen_brightness()
+ }
+
+ /^in:VOLUME/\
+ {
+ split_msg_parts()
+ db["volume"] = msg_body
+ }
+
/^in:MPD_STATE/\
{
split_msg_parts()
print make_bar()
}
+ function set_load_avg( sched) {
+ split($4, sched, "/")
+ db["load_avg_1min"] = $1
+ db["load_avg_5min"] = $2
+ db["load_avg_15min"] = $3
+ db["kern_sched_queue_runnable"] = sched[1]
+ db["kern_sched_queue_total"] = sched[2]
+ db["kern_sched_latest_pid"] = $5
+ }
+
+ function set_disk_io( curr_w, curr_r, prev_w, prev_r) {
+ curr_w = $1
+ curr_r = $2
+ prev_w = db["disk_io_curr_w"]
+ prev_r = db["disk_io_curr_r"]
+ db["disk_io_curr_w"] = curr_w
+ db["disk_io_curr_r"] = curr_r
+ db["disk_io_diff_w"] = curr_w - prev_w
+ db["disk_io_diff_r"] = curr_r - prev_r
+ }
+
+ function set_net_addr_io( \
+ interface, address, io_curr_w, io_curr_r, io_prev_w, io_prev_r\
+ ) {
+ interface = $1
+ address = $2
+ io_curr_w = $3
+ io_curr_r = $4
+ if (interface) {
+ if (address && io_curr_w && io_curr_r) {
+ # recalculate
+ io_prev_w = net_io_curr_w[interface]
+ io_prev_r = net_io_curr_r[interface]
+
+ net_addr[interface] = address
+ net_io_curr_w[interface] = io_curr_w
+ net_io_curr_r[interface] = io_curr_r
+ net_io_diff_w[interface] = io_curr_w - io_prev_w
+ net_io_diff_r[interface] = io_curr_r - io_prev_r
+ } else {
+ # clear
+ net_addr[interface] = ""
+ net_io_curr_w[interface] = 0
+ net_io_curr_r[interface] = 0
+ net_io_diff_w[interface] = 0
+ net_io_diff_r[interface] = 0
+ }
+ }
+ }
+
+ function set_screen_brightness( max, cur) {
+ max = $1
+ cur = $2
+ db["screen_brightness"] = (cur / max) * 100
+ }
function split_msg_parts() {
msg_head = $1
}
function make_bar( position, bar, sep, i, j) {
+ position[++i] = make_status_cpu()
+ position[++i] = make_status_disk()
+ position[++i] = make_status_net()
+ position[++i] = sprintf("B=%s", db["bluetooth_power"])
+ position[++i] = sprintf("*%d%%", db["screen_brightness"])
+ position[++i] = sprintf("(%s)", db["volume"])
position[++i] = make_status_mpd()
position[++i] = db["weather_temperature"]
position[++i] = db["datetime"]
return bar
}
+ function make_status_cpu( load, temp, fan) {
+ load = db["load_avg_1min"]
+ temp = db["temperature"] / 1000
+ fan = db["fan_speed"]
+ return sprintf("C=[%4.2f %d°C %4drpm]", load, temp, fan)
+ }
+
+ function make_status_disk( bytes_per_sector, bytes_per_mb, w, r) {
+ bytes_per_sector = 512
+ bytes_per_mb = 1024 * 1024
+ w = (db["disk_io_diff_w"] * bytes_per_sector) / bytes_per_mb
+ r = (db["disk_io_diff_r"] * bytes_per_sector) / bytes_per_mb
+ return \
+ sprintf("D=[%s %0.3f▲ %0.3f▼]", db["disk_space_used"], w, r)
+ }
+
+ function make_status_net( \
+ out,
+ number_of_interfaces_to_show,
+ n,
+ array_of_prefixes_of_interfaces_to_show,
+ prefix,
+ interface,
+ label,
+ count_printed,
+ sep,
+ io_stat,
+ dw, dr,
+ bytes_per_unit\
+ ) {
+ out = ""
+ number_of_interfaces_to_show = \
+ split(\
+ opt_prefixes_of_net_interfaces_to_show,\
+ array_of_prefixes_of_interfaces_to_show,\
+ ","\
+ )
+ for (n = 1; n <= number_of_interfaces_to_show; n++) {
+ prefix = array_of_prefixes_of_interfaces_to_show[n]
+ for (interface in net_addr) {
+ if (interface ~ ("^" prefix)) {
+ label = substr(interface, 1, 1)
+ if (net_addr[interface]) {
+ bytes_per_mb = 1024 * 1024 # TODO: option
+ dw = net_io_diff_w[interface] / bytes_per_mb
+ dr = net_io_diff_r[interface] / bytes_per_mb
+ io_stat = sprintf("%0.3f▲ %0.3f▼", dw, dr)
+ } else {
+ io_stat = "--"
+ }
+ if (interface ~ "^w") {
+ label = label ":" db["net_wifi_status"]
+ }
+ if (++count_printed > 1) {
+ sep = " "
+ } else {
+ sep = ""
+ }
+ out = out sep label ":" io_stat
+ }
+ }
+ }
+ return sprintf("N[%s]", out)
+ }
+
function make_status_mpd( state, status) {
state = db["mpd_state"]
msg_head="$3"
interval="$4"
while true; do
- echo "${msg_head} $($cmd)" > "$pipe"
- sleep "$interval"
+ $cmd | while read line; do
+ echo "${msg_head} $line" > "$pipe"
+ done
+ sleep "$interval"
done &
}
main() {
- dir_bin="$1"
- dir_data="$2"
- pipe="$dir_data/pipe"
-
- WEATHER_STATION_ID='KJFK'
-
+ # Defaults
+ debug=0
+ dir_data="$HOME/.khatus"
+ weather_station_id='KJFK'
+ screen_brightness_device_name='acpi_video0'
+ prefixes_of_net_interfaces_to_show='w' # comma-separated
+ disk_space_device='/'
+ disk_io_device='sda'
+ thermal_zone=0
+ fan_path='/proc/acpi/ibm/fan'
+
+ # User-overrides
+ long_options=''
+ long_options+='debug'
+ long_options+=',data-dir:'
+ long_options+=',weather-station:'
+ long_options+=',screen-device:'
+ long_options+=',prefixes_of_net_interfaces_to_show:'
+ long_options+=',disk_space_device:'
+ long_options+=',thermal_zone:'
+ long_options+=',fan_path:'
+ OPTS=$(
+ getopt \
+ -o 'd' \
+ -l $long_options \
+ -- "$@"
+ )
+ eval set -- "$OPTS"
+ while true
+ do
+ case "$1" in
+ -d|--debug)
+ debug=1
+ shift
+ ;;
+ --data-dir)
+ dir_data="$2"
+ shift 2
+ ;;
+ --weather-station)
+ weather_station_id="$2"
+ shift 2
+ ;;
+ --screen-device)
+ screen_brightness_device_name="$2"
+ shift 2
+ ;;
+ --prefixes_of_net_interfaces_to_show)
+ prefixes_of_net_interfaces_to_show="$2"
+ shift 2
+ ;;
+ --disk_space_device)
+ disk_space_device="$2"
+ shift 2
+ ;;
+ --disk_io_device)
+ disk_io_device="$2"
+ shift 2
+ ;;
+ --thermal_zone)
+ thermal_zone="$2"
+ shift 2
+ ;;
+ --fan_path)
+ fan_path="$2"
+ shift 2
+ ;;
+ --)
+ shift
+ break
+ ;;
+ esac
+ done
+
+ pipe="$dir_data/khatus_data_pipe"
+ screen_brightness_device_path='/sys/class/backlight'
+ screen_brightness_device_path+="/$screen_brightness_device_name"
+
+ ( echo "Khatus starting with the following parameters:"
+ ( echo " debug|= $debug"
+ echo " dir_data|= $dir_data"
+ echo " pipe|= $pipe"
+ echo " screen_brightness_device_name|= $screen_brightness_device_name"
+ echo " screen_brightness_device_path|= $screen_brightness_device_path"
+ echo " weather_station_id|= $weather_station_id"
+ echo " prefixes_of_net_interfaces_to_show|= $prefixes_of_net_interfaces_to_show"
+ echo " disk_space_device|= $disk_space_device"
+ echo " disk_io_device|= $disk_io_device"
+ echo " thermal_zone|= $thermal_zone"
+ echo " fan_path|= $fan_path"
+ ) | column -ts\|
+ echo ''
+ ) >&2
+
+ mkdir -p "$dir_data"
rm -f "$pipe"
mkfifo "$pipe"
- spawn produce_datetime "$pipe" 'in:DATE_TIME' 1
- spawn produce_weather "$pipe" 'in:WEATHER' $(( 30 * 60 ))
- spawn produce_mpd_state "$pipe" 'in:MPD_STATE' 1
- spawn produce_mpd_song "$pipe" 'in:MPD_SONG' 1
- spawn produce_bar_req "$pipe" 'out:BAR' 1
- consume "$pipe"
+ cmd_produce_screen_brightness='produce_screen_brightness'
+ cmd_produce_screen_brightness+=" $screen_brightness_device_path"
+
+ cmd_produce_weather="produce_weather $weather_station_id"
+
+ cmd_produce_disk_space="produce_disk_space $disk_space_device"
+
+ cmd_produce_disk_io="produce_disk_io $disk_io_device"
+
+ cmd_produce_temperature="produce_temperature $thermal_zone"
+
+ cmd_produce_fan="produce_fan $fan_path"
+
+ # TODO: Redirect each worker's stderr to a dedicated log file
+ spawn produce_datetime "$pipe" 'in:DATE_TIME' 1
+ spawn "$cmd_produce_screen_brightness" "$pipe" 'in:SCREEN_BRIGHTNESS' 1
+ spawn "$cmd_produce_weather" "$pipe" 'in:WEATHER' $(( 30 * 60 ))
+ spawn produce_mpd_state "$pipe" 'in:MPD_STATE' 1
+ spawn produce_mpd_song "$pipe" 'in:MPD_SONG' 1
+ spawn produce_volume "$pipe" 'in:VOLUME' 1
+ spawn produce_bluetooth_power "$pipe" 'in:BLUETOOTH_POWER' 5
+ spawn produce_net_wifi_status "$pipe" 'in:NET_WIFI_STATUS' 5
+ spawn produce_net_addr_io "$pipe" 'in:NET_ADDR_IO' 1
+ spawn "$cmd_produce_disk_space" "$pipe" 'in:DISK_SPACE' 1
+ spawn "$cmd_produce_disk_io" "$pipe" 'in:DISK_IO' 1
+ spawn produce_loadavg "$pipe" 'in:LOAD_AVG' 1
+ spawn "$cmd_produce_temperature" "$pipe" 'in:TEMPERATURE' 1
+ spawn "$cmd_produce_fan" "$pipe" 'in:FAN' 1
+ spawn produce_bar_req "$pipe" 'out:BAR' 1
+
+ consume \
+ "$pipe" \
+ "$debug" \
+ "$prefixes_of_net_interfaces_to_show"
}
main $@
home / code / khatus.git / blobdiff